Call support free : +91 9625981943
Email : info@fountainlight.in
wall mounted led swimming pool lights
Product Introduction of the wall mounted led swimming pool lights
The Pool Light with surface LEDs of 230mm/300mm in diameter, and a thickness of 60mm/86mm, is designed to be installed in pools that do not have holes for PAR56 lamps.
It can be installed at...
The Pool Light with surface LEDs of 230mm/300mm in diameter, and a thickness of 60mm/86mm, is designed to be installed in pools that do not have holes for PAR56 lamps. It can be installed at 12VAC.

It has a high efficiency consuming 6W/9W/12W/15W/18W by means of EPISTAR LEDs, with an opening angle of 120 °, obtaining a color rendering index of 80. Its consumption represents a value of 6/9/12/15/18kWh / 1000h, reducing the amount of energy billed and gas emissions pollutants to the atmosphere. This spotlight offers instant ignition, has an IP68 degree of protection (valid for working under water), as well as being robust enough for the required mechanical requirements. Made of stainless steel with a blue finish.

It must be taken into account that for its correct installation it is necessary to drill the wall of the pool to remove the wiring.
The product should not be tested for more than 10 seconds out of the water.